XEX

Qingdao precision casting factory: precision casting dimension accuracy of castings caused by defects

by:XEX     2020-11-01
Precision casting factory to share under the causing factors of stainless steel precision casting dimension accuracy of castings defects as follows: stainless steel precision casting dimension precision is influenced by the structure of castings, casting material, moulding, shell making, roasting, pouring and so on many factors, has led to the deviation of dimension accuracy of castings and requirements. 1. The influence of the casting structure: a. Casting wall thickness, shrinkage rate is large, thin wall castings, the shrinkage rate is small. b。 Free shrinkage, hinder the little shrinkage. 2. The influence of the casting material: a. Materials in the carbon content is higher, the line of the smaller shrinkage rate, the lower the carbon content, the line, the greater the shrinkage rate. b。 Common material casting shrinkage rate is as follows: casting shrinkage ratio K = ( LM - LJ) / LJ x 100%, LM for cavity size, LJ for casting size. K by the following factors: the wax models K1, K2, alloy casting structure types K3, K4 pouring temperature. 3. The influence of the molding shrinkage of casting line: a. Wax wax temperature, pressure, the influence of the holding time of molten mould size to wax mould temperature is the most obvious, followed by radiation pressure of wax, the holding time in melt after mould for casting the influence of the final size is very small. b。 Wax ( Die) The line of shrinkage is about 0. 9 - 1. 1%. c。 Deposit moudle, precision casting factory will further produce contraction, the shrinkage value is about 10% of the total shrinkage, after 12 hours, but when stored moudle size basically stable. d。 Wax models of radial shrinkage rate was only about shrinkage rate of 30 - length direction Shoot 40%, wax temperature effect on the free shrinkage rate is much greater than stuck to the influence of shrinkage, Optimum temperature for 57 - wax 59 ℃, the higher the temperature the greater the shrinkage) 。 4. The influence of shell making material: using zircon sand, zircon powder, shop on the sand, shop on powder, because of its small expansion coefficient, just 4. 6×10- 6 / ℃, so can be neglected. 5. Shell roasting effect: as the shell of the small expansion coefficient, when the shell temperature of 1150 ℃, is only 0. As a result, 053%, and can be neglected. Precision casting manufacturer said stainless steel precision casting dimension accuracy of castings caused by defects of factors, mainly is the points above, we want to avoid some of the pitfalls of the above problems. https://www. xexfoundry。 com/
This is an global standard which acts as a form of promise that Guangzhou Xinerxun Metal Trading Co., Ltd. manufatures according to the finest quality standards.
Satisfying our customers with the appropriate level of quality is a primary goal and a fundamental element as cast iron suppliers of our business mission.
Although the core manufacturing factor of cast iron suppliers is high technology, smart customers know that we need to enhance our material quality and producing standard.
The proprietor has many years experience in providing promotion services and is a sought after expert in cast iron suppliers.
The cast iron company cast iron suppliers is also available as a cast iron company.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...